Be taught concerning the superior enhancements and capabilities of the Palette 2 and begin 3D printing with as much as 4 colours on a single-extruder 3D printer.
Posted on February 19, 2019
by
Chris Morgan
The Palette 2 from Mosaic Manufacturing is the second iteration of their wildly well-liked filament splicing machine for single extruder 3D printers. We check out the adjustments made and the way they profit the person, in addition to go to enhancements to the just about full redesign of the chassis, making it far more user-friendly and accessible for the top person.
Mosaic Manufacturing nearly stands alone within the trade as the most important title in enabling the at-home 3D printer person with the flexibility to show a single-extruder 3D printer right into a four-color powerhouse. Their preliminary Palette mannequin was an introduction into what is feasible with this nonetheless, considerably new expertise, whereas the Palette 2 refines most of the options and improves most of them. Headquartered in Canada, Mosaic Mfg. is creating choices in additive manufacturing not just for the house person however for industries as nicely. With their SEEM expertise, they hope to allow each person from the hobbyist, all the best way to the manufacturing unit ground.
Only a small pattern of the superior designs you can also make multi-color with the Palette 2.
Product Options
- Plug and Play Setup
- 4 Colours Spliced Into One Functionality
- A number of Materials Sort Assist
- Simple to Clear Jams and Restore
The brand new Palette 2 is way simpler to configure and arrange for the hobbyist 3D printer than the earlier Palette. The interface is less complicated to work with, and there’s no longer a necessity to put in a separate sensor to measure filament stream onto the 3D printer; the stream sensor is now constructed instantly into the Palette 2. Synching with the 3D printer and laptop is now a lot simpler as nicely, making the whole arrange course of a lot faster.
Plug and Play Setup
The brand new Palette 2 is way simpler to configure and arrange for the hobbyist 3D printer than the earlier Palette. The interface is less complicated to work with, and there’s no longer a necessity to put in a separate sensor to measure filament stream onto the 3D printer; the stream sensor is now constructed instantly into the Palette 2. Synching with the 3D printer and laptop is now a lot simpler as nicely, making the whole arrange course of a lot faster.
The CANVAS Interface is straightforward and simple to make use of.
4 Colours Spliced Into One Functionality
The mainstay attraction of the Palette 2 is the flexibility to show any single-extruder 3D printer right into a four-color machine able to printing multi-color prints. The brand new Palette 2 has been upgraded with just a few options and capabilities to make the method simple to make use of and execute. First is the CANVAS platform. Beforehand, there was extra hands-on implementation required from the person to get sustainable outcomes, by slicing twice and loading two completely different recordsdata into each the 3D printer and the Palette. Now with CANVAS, you’ll be able to add your favourite slicer profiles and work nearly utterly in a single interface, with no duplicate slicing essential.
A number of Materials Sort Assist
Along with 3D printing with as much as 4 colours, the Palette 2 may also be set as much as 3D print with completely different supplies in a single print. PLA and PETG are the most well-liked mixtures, however with 4 retailers, the chances are actually a lot bigger than with a single-extrusion machine alone. The Palette 2 is able to splicing ABS, TPU, Nylon, and PLA-scaffold as nicely.
Filament Run Out Detection
The sensors on the Palette 2 also can handle filament run out and be programmed with choices. For 3D prints with lower than 4 colours, an extra spool of the identical shade and materials could be designated because the ‘back-up’ spool when the primary spool runs out, due to this fact avoiding a stalled 3D print. You too can load as much as 4 of the identical shade and filament and do large tasks that require as much as 4 kg of filament – you gained’t should run out of filament ever once more!
The Run Out Sensor helps maintain your uptime to a most.
Simple to Clear Jams and Restore
One of many extra useful redesigns within the Palette 2 is the flexibility to simply and shortly clear jams, impact repairs, and exchange broken components with the brand new modular panels. Not solely are the panels clear, so you’ll be able to see precisely the place the difficulty is, however there are a number of panels in strategic places that may be simply eliminated with thumb screws for fast entry and upkeep. This characteristic alone is a significant promoting level for this superior unit.
There are a selection of optimistic and useful makes use of for the 3D printer at house to think about shopping for the Palette 2 so as to add to their toolkit. At first is the flexibility to 3D print with as much as 4 colours. Simply upgrading to a brand new dual-extrusion 3D printer will run upwards of $1500+ for primary, non-supported 3D printers. Going full-bore for a quad-color machine will run considerably extra. The Palette 2 presents a really inexpensive device for any person trying to do extra with their 3D printer.
The clear entry panels provide you with unprecedented readability when coping with troubleshooting points.
Additionally, if there are vital portions of filament getting used on a single 3D print, the Palette 2 can be utilized as an never-ending filament spool – successfully giving the person a 4 kg spool to work with (so long as they’re all loaded in fact.)
Better of all are the various improved person experiences. From the interface to the setup and repairability, the Palette 2 is improved in nearly each approach over the unique Palette. Mosaic Mfg. has carried out an excellent job listening to the group and making adjustments that profit the person.
The Palette 2 comes within the base mannequin, in addition to the Palette 2+. The Palette 2+ is more proficient at filament manufacturing pace than the Palette 2, giving extra superior customers (these utilizing the Palette 2+ for industrial purposes) extra choices for varied different filaments like ABS, TPU, Nylon, and PVA).
The Palette 2 may also be synced along with your printer and laptop on the similar time with an extra add-on, the CANVAS Hub (offered individually). This permits communication between the 3D printer and the Palette 2; you may also join the Palette 2, 3D printer AND CANVAS to your laptop, making the whole workflow integration seamless from machine to machine.
From our personal exams, the outcomes had been improbable. With just one small calibration subject (which we neglected initially) that brought on a bit of extra stringing than typical, we’ve got had glorious outcomes with the Palette 2 and a number of other 3D printers we’ve got examined with. As with most issues that contain 3D printing, the arrange takes a bit of tweaking to get issues excellent and some run-throughs to verify the tweaks are working. However as soon as we had it dialed in, it labored nice.
The Palette 2 is a wonderful choice for any 3D printer person who’s trying to broaden their multi-color capabilities with out having to buy a wholly new 3D printer. With it’s far more inexpensive price, and the brand new and vastly improved adjustments made, any person can benefit from the Palette 2 to create some actually superb 3D prints.
Conclusion
The Palette 2 is a improbable add-on for anybody trying to broaden into a number of colours or a number of filament 3D printing. The help and enhancements from Mosaic Mfg. are top-notch, they usually have taken enter from the 3D printing group to coronary heart and vastly improved the usability and capabilities and molded them into the Palette 2.
