3D mannequin description
Star from Marios Bross Knited Multiparts
New knitted mannequin, a cool star impressed on the one from Mario Bros.
The mannequin is splited in multipars for straightforward printing.
I used TPU to print it however it may be printed with PLA or some other filament. There are a number of variations of the STL included one with a gap to hold it on a christmas tree. 🎄🎅🌟
Directions:
1.Obtain and unzip the recordsdata
2.Slice the components together with your favourite slicer, and choose the filament you wish to use, it may be TPU or PLA.
Parameters we used with TPU
– Nozzle diameter 0.6 mm
– Layer top 0.2 mm
– Line width 0.6 mm
– Wall Line Depend 1
– High Layers 5 (to help overhangs correctly)
– Backside Layers 1 (to be TPU mode versatile)
– Infill Density 3%
– Infill Sample Strains
– Printing pace 20-30 mm/s
Parameters if you wish to print with PLA
– Nozzle diameter 0.6/0.4 mm
– Layer top 0.2/0.28 mm
– Line width 0.6/0.4 mm
– Wall Line Depend 1-3
– High Layers 4-5
– Backside Layers 4-5
– Infill Density 10-15%
3.Take away any extra or deburr from the components
4.Use adhesive to hitch the half
5.If just like the mannequin please take pleasure in and share
Additionally, you’ll be able to attempt one among my free fashions right here: Cool knitted gingerbread man:
https://cults3d.com/en/3d-model/residence/cool-knitted-gingerbread-man-ii_aguilar
🙂
.
If just like the mannequin please share 🌟🌟🌟🌟🌟
.
NOTE: In case of doubts or feedback please ship an e-mail to iiaguilar87@gmail.com I’d be completely satisfied that will help you.
Don’t forget to share your print outcomes and SUBSCRIBE to my Cults account to get updates.
NOTE IMPORTANT: This stl file is only for private use. Not for business use. No derivatives.
🙂
3D printing settings
Use your favourite model of filament. The fashions on the images had been printed with TPU, however you should utilize the filament you need and share outcomes.
Earlier than printing be sure that your mattress and 3d printer is calibrated and ensure to have a great first layer with the intention to keep away from points, we suggest to make use of the choice “Brim” on construct plate adhesion from Cura slicer or one thing associated in different software program.
Additionally, we suggest have a great layer cooling with the intention to forestall curling and warping.
