3D mannequin description
After a tough night time working, it is time to rejoice Christmas morning alongside Outdated Saint Nick with some North Pole Bowling!
This vacation season, problem your family and friends to a sport of tabletop bowling.
Print and assemble the bowling lane to any size desired and align Santa Claus as you knock down these pins with precision. Select between a snowman, elf or penguin pin, or a mixture of all three. Push the ball into Santa’s glove, rotate the arm again, then flick the deal with and watch the ball fly.
It takes some follow and ability to find out the correct amount of power to push down on the deal with. An excessive amount of and the bowling ball flies upward; too little and it is within the gutter. Both manner it’s nice enjoyable.
If this mannequin brings you vacation cheer, then head on over to my Fb web page to view my different 3D designs and prints: https://www.fb.com/ScenestruckArt
If there are any issues with the fashions, please let me know. Constructive suggestions is all the time welcome.
3D printing settings
FDM examined (Ender 3 V2 Neo). Information sliced via Prusaslicer 2.6.1.
Advocate utilizing glue for the bowling ball and “Bowling Lane_Paddle Platform”.
The pegs for the bowling ball are supposed to align the items as you glue them collectively. When prepared, pinch the ball onto Santa’s Glove. In the event you’re having bother getting the ball to carry, apply a tiny dap of white glue contained in the glove gap and let it settle earlier than utilizing.
Advocate you’ve gotten a printer with a 200mm x 200mm mattress (minimal). The bowling lane items are fairly massive (scale down all items at your personal discretion).
The recordsdata “Bowling Lane_Begin-Half” and “Mid-Half” are smaller sections of the “Full” recordsdata. These enable you print the bowling lanes vertically to keep away from the bottom warping.
The longest peg within the “Bowl Lane_Pegs” file is for holding the paddle platform collectively.
FDM settings:
Print Temp: 200 – 205 C
Mattress Temp: 60 -65 C
Layer top:0.12mm – 0.20mm
Infill: 3 – 10%
Helps: sure (tree helps work)
Velocity: 40 – 85 mm/s
Filament (all PLA):
Esun: Gentle Blue, Very Peri Purple, Gentle Brown
Creality: Rainbow, Orange
Anet: Purple
Flashforge: Pink