COLLAPSING KATANA – GIN ICHIMARU – BLEACH – PRINT IN PLACE + ASSEMBLY VERSION – (NO SUPPORTS)

Gin Ichimaru katana from Bleach, prints in place with No Helps

PRINT IN PLACE VERSION + ASSEMBLY VERSION

For the PRINT-IN-PLACE model, the blade is flat on the tip so it may follow the construct plate, in order for you the pointed blade, it’s good to select 1 of the opposite 2 variations

The blade is skinny, so it’s good to repair it very nicely to the buildplate. I like to recommend utilizing RAFT plate Adhesion.

If you’ll print the "print in place" model, I like to recommend that you simply take a look at print the file "blade_print_test.stl" earlier than printing the whole katana.
It really works higher while you depart the seams on the again of the blade.

Katanas are between 95 and 99 cm lengthy, relying on how far you push the blades. Katana hilt 24.5cm + Blade 68.5/73.5cm

For those who favored this one verify my different designs:
https://cults3d.com/en/customers/PlayArt3D/creations

Prints nicely in PLA
For a strongher Print i like to recommend utilizing PLA+ / PLA850
Nozzle: 0.4mm

For those who need assistance or have any quetion be happy to contact me!