David Friedman, realizing that sundials suck, came up with a solution he called “The Bulbdial Clock”:
The Bulbdial Clock has no hands — just one pole in the center of the clock, and three light sources of varying heights which revolve around the pole casting shadows. In the model illustrated above, the light sources are each attached to a ring which rotates around the pole. The innermost ring rotates once per minute, casting a “second hand” shadow. The middle ring rotates once per hour, and casts the “minute hand” shadow. And the outer ring rotates once every 12 hours, casting the “little hand” shadow.
The Bulbdial Clock can be used flat like a traditional sundial, or mounted vertically on a wall. A variation on the design intended for large-scale installation (such as in a museum) involves a pole sticking up in the middle of a room, while the light sources are mounted on the ceiling, shining down on the pole as they rotate around it.
Evil Mad Scientist made a kit to build such a clock.
The Bulbial Clock went on sale in 2009. And every quarter since then, Windell and Lenore have sent me a royalty check. They got smaller over the years since the kit debuted, but they were always appreciated.
But a few weeks ago they announced that Evil Mad Scientist was acquired by Bantam Tools, a company run by Makerbot founder and 3D printing democratizer Bre Pettis. Together, they are focusing on new products like the NextDraw pen plotter, and moving away from built-it-yourself kits like the Bulbdial Clock.
You can read more in the blog post here.
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Adafruit is on Mastodon, join in! adafruit.com/mastodon
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord
CircuitPython – The easiest way to program microcontrollers – CircuitPython.org
No comments yet.
Adafruit has a “be excellent to each other” comment policy. Help us keep the community here positive and helpful. Stick to the topic, be respectful of makers of all ages and skill levels. Be kind, and don’t spam – Thank you!
