FOLDING KATANA – SHINOBU – 115CM – (DEMON SLAYER: KIMETSU NO YAIBA)

Folding Katana of Shinobu from Demon Slayer Kimetsu no Yaiba

I tested it in PLA+

0.4 Hotend, 0.2mm layer, 2 walls, 15% infill

If they have problems printing the sheets they can put an inner and outer raft for later removal.

Recommendations:

1. Close blade by blade from bottom to top holding the bottom knob and not the handle, this will help the durability.

2.Be careful with the tip

3.Do not open with too much force, it is not necessary.

For painting I recommend acrylic paints and then a layer of resin over the painted part to withstand the friction.

VIDEO OF THE ASSEMBLY

https://vm.tiktok.com/ZM6DTnb3h/

PROFILE

https://cults3d.com/es/usuarios/Makersm3D

NETWORKS

https://linkfly.to/Makersm3D

0.4 Hotend, 0.2mm layer, 2 walls, 15% infill

PLA+

If you have problems when printing the sheets you can put an inner and outer raft for later removal.